How Much Does a Roller Door Cost? Prices and Installation Explained
Considering a roller door for your garage or commercial space? One of the most common questions is: what will the total cost be, including installation? The price of a roller door can vary widely depending on factors such as size, material (steel, aluminum, or insulated options), motorization, and whether it's a standard or custom design. A basic manual single-car garage roller door might start around $800, while a large automated commercial-grade system could exceed $5,000. This guide breaks down the key cost components—from materials and labor to optional add-ons like remote controls or safety sensors—so you can make an informed decision tailored to your needs and budget.
Understanding what a roller door costs in Australia starts with size, material, and features, then extends to the complexity of your opening and installation. While a basic single-width steel roller door can be relatively straightforward, upgrades like automation, insulation, and wind‑rating add to the final figure. The ranges below reflect typical market estimates from local services across the country and can vary by region and supplier.
Key Factors That Determine Roller Door Costs
Several elements shape pricing before installation is even considered. Door size is the biggest variable: single-width openings cost less than wide single or twin-door setups. Material is next, with Colorbond steel offering broad colour options and generally lower cost than aluminium shutters or insulated slats. Design specifications—such as wind or cyclone rating for coastal regions—raise price due to heavier-gauge components. Hardware and operation style matter, too: manual spring-balanced doors are cheaper than motorised versions, and adding smart controls or battery backup increases cost. Finally, site conditions—tight headroom, sloped driveways, or structural changes—can add labour time and ancillary materials.
Comparing Prices Across Different Materials and Designs
For supply-only, many homeowners see single Colorbond steel roller doors landing roughly in the $750–$1,400 range, depending on size and finish. Installed packages commonly sit between about $1,150 and $2,200 for a single, with wide single or paired openings costing more. Insulated foam‑filled slat designs typically fall around $1,500–$3,000 installed for residential sizes, while aluminium commercial shutters often range from $2,500 to $6,000 installed, depending on width, height, and duty cycle. Motorisation adds roughly $350–$700 for a quality roller opener, with installed packages often $650–$950 including brackets and setup. These figures are indicative and can vary in your area based on brand, availability, and site complexity.
Installation Labor and Additional Fees Explained
Labour for a straightforward residential roller door installation can range from roughly $250 to $600, influenced by access, headroom, and the need to adjust guides or framing. Many installers work on fixed quotes for standard openings, while more complex jobs may reflect an hourly structure. Expect additional fees where applicable: removal and disposal of an old door ($100–$250), regional travel or after‑hours loading ($50–$150), electrical work for a new outlet or opener wiring ($150–$350, depending on scope), and carpentry or steel framing adjustments ($150–$500+). If you are in a cyclone zone or exposed coastal location, heavier-duty components and wind‑rating may increase both material and labour.
Budget Planning Tips for Your Roller Door Project
Start with the opening size and any local wind or corrosion considerations, then prioritise features. If you park daily, a reliable motor with soft‑start/stop and safety reversal is a worthwhile upgrade. Where heat or street noise is a concern, consider insulated slats. Request itemised quotes from two to three local services, asking for supply-only and installed pricing so you can compare labour components. Build a contingency of 10–15% for unforeseen site issues such as out‑of‑square openings, replacement of damaged angles, or new power requirements. Finally, factor lifecycle value: higher-spec finishes, quality motors, and professional installation can reduce maintenance costs over time.
Below are example price ranges from well-known Australian brands and products. Figures are indicative and vary by location and site conditions.
| Product/Service | Provider | Cost Estimation |
|---|---|---|
| Roll-A-Door (single Colorbond) | B&D Doors | $900–$1,400 supply; $1,300–$2,200 installed |
| Colorbond Roller Door (single) | Steel-Line Garage Doors | $800–$1,300 supply; $1,200–$2,100 installed |
| Series A Roller Door (single) | Gliderol Garage Doors | $750–$1,200 supply; $1,150–$2,000 installed |
| Roller Door (wide single/double setup) | Centurion Garage Doors | $1,200–$2,400 installed (size dependent) |
| Merlin SilentDrive roller opener | Merlin/Chamberlain | $400–$700 supplied; $650–$950 installed |
| Aluminium commercial roller shutter | Various AU providers | $2,500–$6,000 installed |
Prices, rates, or cost estimates mentioned in this article are based on the latest available information but may change over time. Independent research is advised before making financial decisions.
In summary, the cost of a roller door in Australia depends on door size, material, specification, and the complexity of installation. Most single steel doors fall in the low-thousands installed, with premiums for insulation, cyclone rating, and automation. Comparing itemised quotes from local services in your area, clarifying site conditions, and planning a small contingency can help you achieve a secure, smooth‑operating door at a fair overall price.
